目次
対応製品
- Jupiter-Pre
LS-Dyna 対応カード一覧
| 分類 | カード |
|---|---|
| SOL, Analysis Type | CONTROL_SOLUTION |
| PARAM | CONTROL_CPU |
| CONTROL_TERMINATION | |
| CONTROL_SHELL | |
| CONTROL_TIMESTEP | |
| CONTROL_ENERGY | |
| CONTROL_DYNAMIC_RELAXATION | |
| CONTROL_BULK_VISCOSITY | |
| CONTROL_HOURGLASS | |
| CONTROL_ADAPTIVE | |
| CONTROL_REMESHING | |
| DAMPING_GLOBAL | |
| DATABASE_EXTENT_BINARY | |
| DATABASE_BINARY_D3PLOT | |
| DATABASE_BINARY_D3THDT | |
| DATABASE_BINARY_D3DUMP | |
| CONTROL_IMPLICIT_AUTO (*1) | |
| CONTROL_IMPLICIT_GENERAL (*1) | |
| CONTROL_IMPLICIT_SOLUTION (*1) | |
| CONTROL_ACCURACY (*1) | |
| CONTROL_DEBUG (*1) | |
| CONTROL_MPP_DECOMPOSITION_TRANSFORMATION (*1) | |
| CONTROL_MPP_IO_NODUMP (*1) | |
| CONTROL_MPP_IO_LSTC_REDUCE (*1) | |
| CONTROL_SOLID (*1) | |
| CONTROL_OUTPUT (*1) | |
| DATABASE_ABSTAT (*1) | |
| DATABASE_ABSTAT_CPM (*1) | |
| DATABASE_ATDOUT (*1) | |
| DATABASE_AVSFLT (*1) | |
| DATABASE_BEARING (*1) | |
| DATABASE_BNDOUT (*1) | |
| DATABASE_CURVOUT (*1) | |
| DATABASE_DCFAIL (*1) | |
| DATABASE_DISBOUT (*1) | |
| DATABASE_DEFGEO (*1) | |
| DATABASE_DEFORC (*1) | |
| DATABASE_DEMASSFLOW (*1) | |
| DATABASE_ELOUT (*1) | |
| DATABASE_GCEOUT (*1) | |
| DATABASE_GLSTAT (*1) | |
| DATABASE_GLSTAT_MASS_PROPERTIES (*1) | |
| DATABASE_ICVOUT (*1) | |
| DATABASE_JNTFORC (*1) | |
| DATABASE_MATSUM (*1) | |
| DATABASE_MOVIE (*1) | |
| DATABASE_MPGS (*1) | |
| DATABASE_NCFORC (*1) | |
| DATABASE_NODFOR (*1) | |
| DATABASE_NODOUT (*1) | |
| DATABASE_PBSTAT (*1) | |
| DATABASE_PLLYOUT (*1) | |
| DATABASE_PRTUBE (*1) | |
| DATABASE_PYRO (*1) | |
| DATABASE_RBDOUT (*1) | |
| DATABASE_RCFORC (*1) | |
| DATABASE_RWFORC (*1) | |
| DATABASE_SBTOUT (*1) | |
| DATABASE_SECFORCE (*1) | |
| DATABASE_SLEOUT (*1) | |
| DATABASE_SNSROUT (*1) | |
| DATABASE_SPCFORC (*1) | |
| DATABASE_SPHOUT (*1) | |
| DATABASE_SPHMASSFLOW (*1) | |
| DATABASE_SSSTAT (*1) | |
| DATABASE_SSSTAT_MASS_PROPERTIES (*1) | |
| DATABASE_SWFORC (*1) | |
| DATABASE_TPRINT (*1) | |
| DATABASE_TRHIST (*1) | |
| DATABASE_BINARY_INTFOR_FILE (*1) | |
| DATABASE_BINARY_RUNRSF (*1) | |
| GRID | NODE |
| Element | ELEMENT_SOLID |
| ELEMENT_SHELL | |
| ELEMENT_BEAM_ORIENTATION | |
| ELEMENT_BEAM | |
| ELEMENT_MASS | |
| ELEMENT_DISCRETE | |
| Property | SECTION_SOLID SECTION_SOLID_TITLE |
| SECTION_SHELL SECTION_SHELL_TITLE | |
| SECTION_BEAM | |
| SECTION_DISCRETE | |
| SECTION_POINT_SOURCE | |
| SET_BEAM SET_BEAM_TITLE | |
| PART_COMPOSITE | |
| SET_NODE_LIST_TITLE | |
| SET_SEGMENT_TITLE | |
| Material | MAT_ELASTIC |
| MAT_ORTHOTROPIC_ELASTIC | |
| MAT_PLASTIC_KINEMATIC | |
| MAT_ISOTROPIC_ELASTIC_PLASTIC | |
| MAT_RIGID | |
| MAT_UNIFIED_CREEP | |
| MAT_COMPOSITE_DAMAGE | |
| MAT_ENHANCED_COMPOSITE_DAMAGE | |
| MAT_ORTHOTROPIC_ELASTIC | |
| MAT_PIECEWISE_LINEAR_PLASTICITY | |
| MAT_COHESIVE_MIXED_MODE | |
| MAT_ARUP_ADHESIVE | |
| MAT_4A_MICROMEC | |
| Contact | CONTROL_CONTACT |
| CONTACT_AUTOMATIC_SURFACE_TO_SURFACE_ID | |
| CONTACT_AUTOMATIC_SINGLE_SURFACE_ID | |
| CONTACT_AUTOMATIC_SURFACE_TO_SURFACE_MORTAR_ID | |
| CONTACT_FORCE_TRANSDUCER_PENALTY_ID | |
| Boundary condition | DEFINE_COORDINATE_SYSTEM |
| DEFINE_CURVE DEFINE_CURVE_TITLE | |
| CONSTRAINED_LINEAR_LOCAL | |
| MAT_SPRING_ELASTIC | |
| LOAD_SEGMENT | |
| LOAD_SHELL_ELEMENT | |
| LOAD_NODE_POINT | |
| BOUNDARY_SPC_NODE | |
| BOUNDARY_PRESCRIBED_MOTION_NODE BOUNDARY_PRESCRIBED_MOTION_RIGID BOUNDARY_PRESCRIBED_MOTION_SET | |
| DEFINE_TABLE DEFINE_TABLE_TITLE | |
| DEFINE_VECTOR DEFINE_VECTOR_TITLE | |
| CONSTRAINED_EXTRA_NODES CONSTRAINED_EXTRA_NODES_SET | |
| CONSTRAINED_NODAL_RIGID_BODY CONSTRAINED_NODAL_RIGID_BODY_TITLE | |
| DAMPING_PART_STIFFNESS | |
| DEFINE_TRANSFORMATION DEFINE_TRANSFORMATION_TITTLE | |
| NODE_TRANSFORM | |
| DEFINE_TABLE_2D DEFINE_TABLE_2D_TITLE | |
| その他 | PART |
| PART_COMPOSITE |
Note
(*1) エクスポートのみ